T4 Gasket Divided

T3 Gasket Divided

60mm wastegate flange OUT

Bolt on oil feed kit for M103/M104 (5001)

• 6 injectors 2200cc connectors
• 6 vag coil connectors
• 1 IAT connector
• 1 CLT connector
• 1 TPS connector
• 1 knock sensor connector
• 1 VR sensor connector

722.6 Gearbox Controller Complete with a bolton harness, boost sensor and display

T4 Gasket Single

Oil drain gasket

• 3 bar = 410L / hr
• 5 bar = 350L / hr
• 7 bar = 310L / hr

CONNECTIONS:

M18 x 1.5 in M12 x 1.5 out

60mm wastegate clamp IN

Oil feed gasket

Fits knock, crank vr, clt, iat sensors

Includes:

• 1 flange
• 1 clamp 

(5004) Oilcooler kit M103 for stock oilfilter housing use

• Oilsandwich
• 16 row oilcooler
• 1pcs 160cm hose
• 1pcs 140cm hose

1300hp fuel system  (5009)

• 2x turbobandit fuelpumps
• 1x double fuelpump bracket
• 2x fuelpump fuel rail
• 1x an10 fuelfeed line 430cm
• 1x an8 fuelreturn line 270cm
• 1x an10 line between fuelfilter and fuelrail 100cm
• 1x an8 line between fuelrail and fuel pressure regulator
• 1x fuelfilter 100 micron (e85)
• 1x Fuel pressure regulator BIG ball focker

Set of 6

Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaft

Low comp H-beam Rods M104.942 (2.8L) Compression ratio: from 10 to 8.4

Good for 1800hp, Bolts are included in all connecting rods!

Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm

C / C: 147

Big End: 51.6

Pin: 22

Wide: 22

150g lighter then OEM rods! (each rod)

Turbine housing 0,63 A/R

Base price is for camshafts that you send to us for inspection and modification. If you wish to get complete part then choose option "Our"

Turbine shaft

T3 twin scroll A/R 0,84

TEMPORARILY OUT OF STOCK, AVAILABLE FOR BACKORDER

TB90 BLACK DEATH 1400HP+ You will never find a 90mm turbina with such a fast spoolup as our BLACK DEATH! Faster than the wind! Perfect for everybody! Billet 8 and 11 blades Extended Tip Technology compressor wheel!

Compressor:

• 1,06 A/R
• 5" intake
• 3" outlet
• 90mm inducer
• 119mm exducer

Turbine:

• T4 Divided flange
• 1.07 A/R
• 3.5-4.0 adapter v-band outlet
• 88mm inducer
• 78mm exducer
• Oilcooled

Vband kit + gaskets include

1,6mm pipes