EFI

• 6 injectors 2200cc connectors
• 6 vag coil connectors
• 1 IAT connector
• 1 CLT connector
• 1 TPS connector
• 1 knock sensor connector
• 1 VR sensor connector

• 6 injectors 2200cc connectors
• 6 Wasted spark coil connectors connectors
• 1 IAT connector
• 1 CLT connector
• 1 TPS connector
• 1 knock sensor connector
• 1 VR sensor connector

Suitable for any aftermarket EFI M14 thread.

Connector fits OEM harness and will power coolant gauge on the cluster

Suitable for any aftermarket EFI M12 thread

Enables reading camshaft signal. Fits Bolt with our VR sensor. Replaces the distributor

Use rotor bracket as trigger.

Cut off 2 attachment arms and leave one as a tooth

To be used with our VR Sensor bracket

Best VR sensor on the market.

Provides a clean and strong signal.

Fits Michael bolton on the oil pan below the trigger wheel

Fits bolton on the oil pan below the trigger wheel

SENSOR IS NOT INCLUDED

Fits bolton on the oil pan below the trigger wheel

Fits bolton on the oil pan below the trigger wheel

Sensor is not included

Smoothest TPS on the market

Fits to most of the throttle body, both clockwise and counterclockwise

Adapter fits bolt on our throttle body and TPS

Bolt on replacement instead of the harmonic damper. 

Required parts for M104 installation:

M103 pulley (A 603 032 02 04)

M103 center hub (A 104 030 00 08)

You need VR Sensor bracket with VR sensor to read from it. Find them below

- LSU 4.9

- Wide-band Oxygen / Lambda sensor

- 1m length

Fits on engine block, reads from gearbox flywheel

Spacer for OEM Crank sensor located on engine block

OEM Camshaft sensor

Fits knock, crank vr, clt, iat sensors