Every wastegate is tested for tightness. Flanges and clamps included. 

Contains 3 springs: 0.5 bar, 0.6 bar, 0.9 bar

Bolt on replacement instead of the harmonic damper. For M104 installation you need m103 pulley (A 603 032 02 04) and m103 center hub  (A 104 030 00 08)
You need VR Sensor bracket with VR sensor to read from it. Find them below

Gasket not included!

Fits in any wagon w201, w202, w124, w210

• Stainless steel 304L
• 42x2mm pipes
• 15mm Mild steel flanges
• T3/T4 universal divided flange
• 60mm wastegate flange
• TIG hand welded
• El polished.

Gasket not included!

Fits in any wagon w201, w202, w124, w210

• Stainless steel 304L
• 42x2mm pipes
• 15mm Mild steel flanges
• T3/T4 universal divided flange
• 60mm wastegate flange
• TIG hand welded
• El polished.

PPfffshhhhhhhh!!!!

(5002,5005) Oilcooler, turbina oilfeed, oilfilter relocator kit for M103/M104/om603/om606 include:

• 16 row oilcooler
• Relocator plate
• Oilfilter relocator
• Turbina oilfeed hose 150cm + turbina oil flange
• 1 pcs 160cm hose
• 1 pcs 110cm hose
• 1pcs 50cm hose
• UNF 3/4- 16 Filter thread Mercedes OEM gasket A 601 184 05 80

Oil filter relocator compatible with M103/M104/om603/om606 

Set of 6

Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaft

Compression ratios:

3.0 M103 from 9.2 to 7.8
3.0 M104 from 10 to 8.6
3.0 M104 from 10 to 8.5
3.6 M104 from 10.5 to 9.6

Good for 1800hp, Bolts are included in all connecting rods!

Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm

C / C: 143

Big End: 51.6

Pin: 22

Wide: 22

150g lighter then OEM rods! (each rod)

Adapter fits bolt on our throttle body and TPS

Fits bolton on the oil pan below the trigger wheel

Oil filter relocator plate compatible with M103/M104/om603/om606

Thread: UNF 3/4 - 16

Smoothest TPS on the market

Fits to most of the throttle body, both clockwise and counterclockwise

Fuel rail, throttle body and throttle wire bracket included in the price. Gasket not included!

If you select custom powder coat option message us at info@turbobandit.com. Gloss black manifolds are in stock.

Full flow racing factory made intake manifold For 2.8/3.2/3.6 engine variants

Intake manifold fits in all wagons, W201, W124, W126, W210, W202 and others.

Suitable gaskets part numbers:

Mercedes A1041410980
Elring 811.122
Goetze 31-027196-00
Reinz 71-29493-00

Vacuum line thread 1/2-20 UNF

Sensor thread on the bottom M14x1.5

NB! Oil filter housing and oil filter must be moved, you can use our oil filter relocator. Links below.

Compressor housing o'ring compatible with TB60/TB70/TB80/TB90 Turbochargers

Set of 6

Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaft

Compression ratios:
3.0 M103 from 9.2 to 8.5
3.0 M104 from 10 to 9.2
3.2 M104 from 10 to 9.1
3.6 M104 stock length

Good for 1800hp, Bolts are included in all connecting rods!

Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm

C / C: 144

Big End: 51.6

Pin: 22

Width: 22

150g lighter then OEM rods! (each rod)