Active filters
-
W126 Go/no-go gauge
€0.00This is a digital download for a 3D printed tool, see attachments below for .stl files
For adjusting valve clearances on M116/M117 enginesSIR M0024
MB 117 589 06 23 00
-
- On sale!
Head bolts M103 (14pcs)
€75.00 -
- On sale!
Head bolts M104 (14pcs)
€122.61 -
143mm for 3.0/3.2/3.6L M103/M104
€732.00Set of 6
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaftCompression ratios:
3.0 M103 from 9.2 to 7.8
3.0 M104 from 10 to 8.6
3.0 M104 from 10 to 8.5
3.6 M104 from 10.5 to 9.6Good for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 143
Big End: 51.6
Pin: 22
Wide: 22
150g lighter then OEM rods! (each rod)
-
- On sale!
144mm for 3.0/3.2/3.6L M103/M104
€732.00Set of 6
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaftCompression ratios:
3.0 M103 from 9.2 to 8.5
3.0 M104 from 10 to 9.2
3.2 M104 from 10 to 9.1
3.6 M104 stock lengthGood for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 144
Big End: 51.6
Pin: 22
Width: 22
150g lighter then OEM rods! (each rod)
-
147mm for 2.8L M104.942
€732.00Set of 6
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaftLow comp H-beam Rods M104.942 (2.8L) Compression ratio: from 10 to 8.4
Good for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 147
Big End: 51.6
Pin: 22
Wide: 22
150g lighter then OEM rods! (each rod)
-
M104 ENEM camshafts
€915.00Base price is for camshafts that you send to us for inspection and modification. If you wish to get complete part then choose option "Our"
-
M103 ENEM camshaft
€732.00
