Featured Products
Featured Products
Special Products
Special Products
M103 Twin-scroll exhaust...
OM603 Twin-scroll exhaust...
OM606 Twin-scroll exhaust...
Active filters
-
W126 Go/no-go gauge
€0.00This is a digital download for a 3D printed tool, see attachments below for .stl files
For adjusting valve clearances on M116/M117 enginesSIR M0024
MB 117 589 06 23 00
-
- On sale!
Nissan RB26DET - Custombuilt SS twinentry manifold
€518.50- Stainless steel 304L 42x2mm pipes.
- 15mm Mild steel flanges
- T3/T4 universal divided flange
- 60mm wastegate flange
- TIG hand welded
- El polished
Bolt on without having to lift up the engine and remove the AC!
-
- On sale!
Head bolts M103 (14pcs)
€122.00 -
- On sale!
Head bolts M104 (14pcs)
€122.61 -
- On sale!
143mm for 3.0/3.2L M104.980 / M104.992 /M104.995 /M103.98X
€854.00Set of 6
Compression ratio: M103.98X from 9.2 to 7.8 M104.98X from 10 to 8.6 M104.99X from 10 to 8.5
Good for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 143
Big End: 51.6
Pin: 22
Wide: 22
150g lighter then OEM rods! (each rod)
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaft
-
- On sale!
144mm for 3.0/3.2L M104.980 / M104.992 /M104.995 /M103.98X
€854.00Set of 6
Compression ratio: M103.98X from 9.2 to 8.5 M104.98X from 10 to 9.2 M104.99X from 10 to 9.1
Good for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 144
Big End: 51.6
Pin: 22
Wide: 22
150g lighter then OEM rods! (each rod)
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaft
-
M104 ENEM camshafts
€915.00Base price is for camshafts that you send to us for inspection and modification. If you wish to get complete part then choose option "Our"
-
M103 ENEM camshaft
€732.00 -
- On sale!
Racing engine mounts X2
€274.50Out thread 1/2 "20UNF
In M10 thread Drill 11,5mm hole
In stock aluminum mount and thread 1/2" 20UNF
Fits bolt on the W124 with all inline 4 and 6
