Featured Products
Featured Products
Special Products
Special Products
M103 Twin-scroll exhaust...
OM603 Twin-scroll exhaust...
OM606 Twin-scroll exhaust...
Active filters
-
W126 Go/no-go gauge
€0.00This is a digital download for a 3D printed tool, see attachments below for .stl files
For adjusting valve clearances on M116/M117 enginesSIR M0024
MB 117 589 06 23 00
-
3.0L M104
€3,300.00THIS KIT DOES NOT INCLUDE ANY ELECTRONICS
Everyone has different preferences on what ECU platform to use. Our hardware is suited for short EV14 Bosch injectors with 38mm adapters and Audi R8 Coils (AUDI OEM 06E 905 115 F)
Flow-tested injectors and adapters can be found on FINJECTORThere are some differences in engine models and this is a large package to ship so it's best if you place order for a kit through email info@turbobandit.com for personalized offer if for example you want to go with Garrett, Holset or BorgWarner turbina. Check below for kit contents.
-
2.8L/3.2L M104
€4,100.00THIS KIT DOES NOT INCLUDE ANY ELECTRONICS
Everyone has different preferences on what ECU platform to use. Our hardware is suited for short EV14 Bosch injectors with 38mm adapters and Audi R8 Coils (AUDI OEM 06E 905 115 F)
Flow-tested injectors and adapters can be found on FINJECTORThere are some differences in engine models and this is a large package to ship so it's best if you place order for a kit through email info@turbobandit.com for personalized offer if for example you want to go with Garrett, Holset or BorgWarner turbina. Check below for kit contents.
-
- On sale!
Nissan RB26DET - Custombuilt SS twinentry manifold
€518.50- Stainless steel 304L 42x2mm pipes.
- 15mm Mild steel flanges
- T3/T4 universal divided flange
- 60mm wastegate flange
- TIG hand welded
- El polished
Bolt on without having to lift up the engine and remove the AC!
-
- On sale!
Head bolts M103 (14pcs)
€122.00 -
- On sale!
Head bolts M104 (14pcs)
€122.61 -
- On sale!
143mm for 3.0/3.2L M104.980 / M104.992 /M104.995 /M103.98X
€854.00Set of 6
Compression ratio: M103.98X from 9.2 to 7.8 M104.98X from 10 to 8.6 M104.99X from 10 to 8.5
Good for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 143
Big End: 51.6
Pin: 22
Wide: 22
150g lighter then OEM rods! (each rod)
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaft
-
- On sale!
144mm for 3.0/3.2L M104.980 / M104.992 /M104.995 /M103.98X
€854.00Set of 6
Compression ratio: M103.98X from 9.2 to 8.5 M104.98X from 10 to 9.2 M104.99X from 10 to 9.1
Good for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 144
Big End: 51.6
Pin: 22
Wide: 22
150g lighter then OEM rods! (each rod)
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaft
-
M104 ENEM camshafts
€915.00Base price is for camshafts that you send to us for inspection and modification. If you wish to get complete part then choose option "Our"
-
M103 ENEM camshaft
€732.00 -
M104 Bolt on engine harness
€646.60- 6 injectors 2200cc connectors
- 6 vag coil connectors
- 1 IAT connector
- 1 CLT connector
- 1 TPS connector
- 1 knock sensor connector
- 1 VR sensor connector
-
M103 Bolt on engine harness
€585.60- 6 injectors 2200cc connectors
- 6 Wasted spark coil connectors connectors
- 1 IAT connector
- 1 CLT connector
- 1 TPS connector
- 1 knock sensor connector
- 1 VR sensor connector
-
-
-
