SHOP BY CATEGORY

Active filters

  • Categories: Connecting rods
  • Categories: Full kits
  • Quick view

    3.0L M104

    €3,300.00

     

    THIS KIT DOES NOT INCLUDE ANY ELECTRONICS. READ DESCRIPTION BELOW AND TUNING FAQ IN THE WEBSITE MENU.

     

    Everyone has different preferences on what ECU platform to use. Our hardware is suited for short EV14 Bosch injectors with 38mm adapters and Audi R8 Coils (AUDI OEM 06E 905 115 F)

    There are some differences in engine models and this is a large package to ship so it's best if you place order for a kit through email info@turbobandit.com for personalized offer if for example you want to go with Garrett, Holset or BorgWarner turbina. Check below for kit contents.

  • Quick view

    2.8L/3.2L M104

    €4,100.00

     

    THIS KIT DOES NOT INCLUDE ANY ELECTRONICS YET. READ DESCRIPTION BELOW AND TUNING FAQ IN THE WEBSITE MENU

     

    Everyone has different preferences on what ECU platform to use. Our hardware is suited for short EV14 Bosch injectors with 38mm adapters and Audi R8 Coils (AUDI OEM 06E 905 115 F)

    There are some differences in engine models and this is a large package to ship so it's best if you place order for a kit through email info@turbobandit.com for personalized offer if for example you want to go with Garrett, Holset or BorgWarner turbina. Check below for kit contents.

  • Quick view

    143mm for 3.0/3.2/3.6L M103/M104

    €732.00



    Set of 6

    Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaft

    Compression ratios:

    3.0 M103 from 9.2 to 7.8
    3.0 M104 from 10 to 8.6
    3.0 M104 from 10 to 8.5
    3.6 M104 from 10.5 to 9.6



    Good for 1800hp, Bolts are included in all connecting rods!

    Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm

    C / C: 143

    Big End: 51.6

    Pin: 22

    Wide: 22

    150g lighter then OEM rods! (each rod)

  • Quick view
    • On sale!

    144mm for 3.0/3.2/3.6L M103/M104

    €732.00

    Set of 6

    Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaft

    Compression ratios:
    3.0 M103 from 9.2 to 8.5
    3.0 M104 from 10 to 9.2
    3.2 M104 from 10 to 9.1
    3.6 M104 stock length

    Good for 1800hp, Bolts are included in all connecting rods!

    Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm

    C / C: 144

    Big End: 51.6

    Pin: 22

    Width: 22

    150g lighter then OEM rods! (each rod)

  • Quick view

    147mm for 2.8L M104.942

    €732.00

    Set of 6

    Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaft

    Low comp H-beam Rods M104.942 (2.8L) Compression ratio: from 10 to 8.4

    Good for 1800hp, Bolts are included in all connecting rods!

    Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm

    C / C: 147

    Big End: 51.6

    Pin: 22

    Wide: 22

    150g lighter then OEM rods! (each rod)