Featured Products
Featured Products
Special Products
Special Products
M103 Twin-scroll exhaust...
OM603 Twin-scroll exhaust...
OM606 Twin-scroll exhaust...
Active filters
-
3.0L M104
€3,300.00THIS KIT DOES NOT INCLUDE ANY ELECTRONICS
Everyone has different preferences on what ECU platform to use. Our hardware is suited for short EV14 Bosch injectors with 38mm adapters and Audi R8 Coils (AUDI OEM 06E 905 115 F)
Flow-tested injectors and adapters can be found on FINJECTORThere are some differences in engine models and this is a large package to ship so it's best if you place order for a kit through email info@turbobandit.com for personalized offer if for example you want to go with Garrett, Holset or BorgWarner turbina. Check below for kit contents.
-
2.8L/3.2L M104
€4,100.00THIS KIT DOES NOT INCLUDE ANY ELECTRONICS
Everyone has different preferences on what ECU platform to use. Our hardware is suited for short EV14 Bosch injectors with 38mm adapters and Audi R8 Coils (AUDI OEM 06E 905 115 F)
Flow-tested injectors and adapters can be found on FINJECTORThere are some differences in engine models and this is a large package to ship so it's best if you place order for a kit through email info@turbobandit.com for personalized offer if for example you want to go with Garrett, Holset or BorgWarner turbina. Check below for kit contents.
-
- On sale!
143mm for 3.0/3.2L M104.980 / M104.992 /M104.995 /M103.98X
€854.00Set of 6
Compression ratio: M103.98X from 9.2 to 7.8 M104.98X from 10 to 8.6 M104.99X from 10 to 8.5
Good for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 143
Big End: 51.6
Pin: 22
Wide: 22
150g lighter then OEM rods! (each rod)
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaft
-
- On sale!
144mm for 3.0/3.2L M104.980 / M104.992 /M104.995 /M103.98X
€854.00Set of 6
Compression ratio: M103.98X from 9.2 to 8.5 M104.98X from 10 to 9.2 M104.99X from 10 to 9.1
Good for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 144
Big End: 51.6
Pin: 22
Wide: 22
150g lighter then OEM rods! (each rod)
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaft
-
-
Transmission 722.6 modification
€3,540.00If you want a complete rebuilt transmission from us select the option below! (Additional cost of the transmission itself)
We will renovate and modify your transmission if you send your transmission to us. We've been running with our modified 722.6 trannys over 1200hp!!!!For more information read description!
-
722.6 Gearbox Controller
€1,037.00722.6 Gearbox Controller Complete with a bolton harness, boost sensor and display
-
Valvebody 722.6 modification
€865.00For harder and faster shift
You need to send your valvebody to us
-
Porsche 996/997 transmission modification
€4,300.00We will renovate and modify your transmission for you.
-
M104 Bolt on engine harness
€646.60- 6 injectors 2200cc connectors
- 6 vag coil connectors
- 1 IAT connector
- 1 CLT connector
- 1 TPS connector
- 1 knock sensor connector
- 1 VR sensor connector
-
M103 Bolt on engine harness
€585.60- 6 injectors 2200cc connectors
- 6 Wasted spark coil connectors connectors
- 1 IAT connector
- 1 CLT connector
- 1 TPS connector
- 1 knock sensor connector
- 1 VR sensor connector
-
-
-
-
-
-
-
-
-
-
TPS sensor
€76.86Smoothest TPS on the market
Fits to most of the throttle body, both clockwise and counterclockwise
-
