Active filters
-
Gauge plate W124
€96.58 -
- On sale!
143mm for 3.0/3.2L M104.980 / M104.992 /M104.995 /M103.98X
€854.00Set of 6
Compression ratio: M103.98X from 9.2 to 7.8 M104.98X from 10 to 8.6 M104.99X from 10 to 8.5
Good for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 143
Big End: 51.6
Pin: 22
Wide: 22
150g lighter then OEM rods! (each rod)
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaft
-
- On sale!
144mm for 3.0/3.2L M104.980 / M104.992 /M104.995 /M103.98X
€854.00Set of 6
Compression ratio: M103.98X from 9.2 to 8.5 M104.98X from 10 to 9.2 M104.99X from 10 to 9.1
Good for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 144
Big End: 51.6
Pin: 22
Wide: 22
150g lighter then OEM rods! (each rod)
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaft
-
- On sale!
Racing engine mounts X2
€274.50Out thread 1/2 "20UNF
In M10 thread Drill 11,5mm hole
In stock aluminum mount and thread 1/2" 20UNF
Fits bolt on the W124 with all inline 4 and 6
-
M104 Bolt on engine harness
€646.60- 6 injectors 2200cc connectors
- 6 vag coil connectors
- 1 IAT connector
- 1 CLT connector
- 1 TPS connector
- 1 knock sensor connector
- 1 VR sensor connector
-
M103 Bolt on engine harness
€585.60- 6 injectors 2200cc connectors
- 6 Wasted spark coil connectors connectors
- 1 IAT connector
- 1 CLT connector
- 1 TPS connector
- 1 knock sensor connector
- 1 VR sensor connector
-
-
-
-
-
-
-
-
-
-
TPS sensor
€76.86Smoothest TPS on the market
Fits to most of the throttle body, both clockwise and counterclockwise
-
-