Active filters
-
Tune your car package
€36,600.00We need your car in our workshop in Estonia Tallinn for complete custom Kit.
Build time up to 4 months.
We can build on any Mercedes model with M103 or 104 engine
If you don't have inline 6 engine in your car we can swap the engine to a M103 or M104 engine.
We tune only M103 and M104!
The transmission models we modify is ONLY 722.6
-
- On sale!
Nissan RB25DET - Custombuilt SS twinentry manifold
€500.00 €915.00-
Gasket not included!
- Stainless steel 304L 42x2mm pipes.
- 15mm Mild steel flanges
- T3/T4 universal divided flange
- 60mm wastegate flange
- TIG hand welded
- El polished
-
- On sale!
Nissan RB26DET - Custombuilt SS twinentry manifold
€500.00 €915.00-
Gasket not included!
-
- Stainless steel 304L 42x2mm pipes.
- 15mm Mild steel flanges
- T3/T4 universal divided flange
- 60mm wastegate flange
- TIG hand welded
- El polished
Bolt on without having to lift up the engine and remove the AC!
-
- On sale!
M103 Twin-scroll exhaust manifold
€732.00 €915.00Gasket not included!
Fits in any wagon w201, w202, w124, w210
- Stainless steel 304L
- 42x2mm pipes
- 15mm Mild steel flanges
- T3/T4 universal divided flange
- 60mm wastegate flange
- TIG hand welded
- El polished.
-
- On sale!
OM603 Twin-scroll exhaust manifold
€732.00 €915.00Gasket not included!
Fits in any wagon w201, w202, w124, w210
- Stainless steel 304L
- 42x2mm pipes
- 15mm Mild steel flanges
- T3/T4 universal divided flange
- 60mm wastegate flange
- TIG hand welded
- El polished.
-
- On sale!
OM606 Twin-scroll exhaust manifold
€732.00 €915.00Gasket not included!
Fits in any wagon w201, w202, w124, w210
- Stainless steel 304L
- 42x2mm pipes
- 15mm Mild steel flanges
- T3/T4 universal divided flange
- 60mm wastegate flange
- TIG hand welded
- El polished.
-
143mm for 3.0/3.2/3.6L M103/M104
€732.00Set of 6
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaftCompression ratios:
3.0 M103 from 9.2 to 7.8
3.0 M104 from 10 to 8.6
3.0 M104 from 10 to 8.5
3.6 M104 from 10.5 to 9.6Good for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 143
Big End: 51.6
Pin: 22
Wide: 22
150g lighter then OEM rods! (each rod)
-
- On sale!
144mm for 3.0/3.2/3.6L M103/M104
€732.00Set of 6
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaftCompression ratios:
3.0 M103 from 9.2 to 8.5
3.0 M104 from 10 to 9.2
3.2 M104 from 10 to 9.1
3.6 M104 stock lengthGood for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 144
Big End: 51.6
Pin: 22
Width: 22
150g lighter then OEM rods! (each rod)
-
147mm for 2.8L M104.942
€732.00Set of 6
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaftLow comp H-beam Rods M104.942 (2.8L) Compression ratio: from 10 to 8.4
Good for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 147
Big End: 51.6
Pin: 22
Wide: 22
150g lighter then OEM rods! (each rod)
-
- On sale!
722.6 Gearbox Controller
€837.00 €1,037.00722.6 Gearbox Controller Complete with a bolton harness, boost sensor and display
-
M104 Bolt on engine harness
€646.60- 6 injectors 2200cc connectors
- 6 vag coil connectors
- 1 IAT connector
- 1 CLT connector
- 1 TPS connector
- 1 knock sensor connector
- 1 VR sensor connector
-
M103 Bolt on engine harness
€585.60- 6 injectors 2200cc connectors
- 6 Wasted spark coil connectors connectors
- 1 IAT connector
- 1 CLT connector
- 1 TPS connector
- 1 knock sensor connector
- 1 VR sensor connector
-
-
- New
CLT Sensor for OEM Dashboard
€7.55Connector fits OEM harness and will power coolant gauge on the cluster
-
-
M103 Camsensor Plate
€103.70Enables reading camshaft signal. Fits Bolt with our VR sensor. Replaces the distributor
Use rotor bracket as trigger.
Cut off 2 attachment arms and leave one as a tooth
-
Crankshaft VR Sensor
€26.96To be used with our VR Sensor bracket
Best VR sensor on the market.Provides a clean and strong signal.
-
-
-
-
-
TPS sensor
€47.07Smoothest TPS on the market
Fits to most of the throttle body, both clockwise and counterclockwise
-
-
Triggerwheel M103/M104
€101.67Bolt on replacement instead of the harmonic damper. For M104 installation you need m103 pulley (A 603 032 02 04) and m103 center hub (A 104 030 00 08)
You need VR Sensor bracket with VR sensor to read from it. Find them below
