Active filters
-
- On sale!
Nissan RB25DET - Custombuilt SS twinentry manifold
€500.00 €915.00-
Gasket not included!
- Stainless steel 304L 42x2mm pipes.
- 15mm Mild steel flanges
- T3/T4 universal divided flange
- 60mm wastegate flange
- TIG hand welded
- El polished
-
- On sale!
Nissan RB26DET - Custombuilt SS twinentry manifold
€500.00 €915.00-
Gasket not included!
-
- Stainless steel 304L 42x2mm pipes.
- 15mm Mild steel flanges
- T3/T4 universal divided flange
- 60mm wastegate flange
- TIG hand welded
- El polished
Bolt on without having to lift up the engine and remove the AC!
-
- On sale!
M103 Twin-scroll exhaust manifold
€732.00 €915.00Gasket not included!
Fits in any wagon w201, w202, w124, w210
- Stainless steel 304L
- 42x2mm pipes
- 15mm Mild steel flanges
- T3/T4 universal divided flange
- 60mm wastegate flange
- TIG hand welded
- El polished.
-
- On sale!
OM603 Twin-scroll exhaust manifold
€732.00 €915.00Gasket not included!
Fits in any wagon w201, w202, w124, w210
- Stainless steel 304L
- 42x2mm pipes
- 15mm Mild steel flanges
- T3/T4 universal divided flange
- 60mm wastegate flange
- TIG hand welded
- El polished.
-
- On sale!
OM606 Twin-scroll exhaust manifold
€732.00 €915.00Gasket not included!
Fits in any wagon w201, w202, w124, w210
- Stainless steel 304L
- 42x2mm pipes
- 15mm Mild steel flanges
- T3/T4 universal divided flange
- 60mm wastegate flange
- TIG hand welded
- El polished.
-
143mm for 3.0/3.2/3.6L M103/M104
€732.00Set of 6
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaftCompression ratios:
3.0 M103 from 9.2 to 7.8
3.0 M104 from 10 to 8.6
3.0 M104 from 10 to 8.5
3.6 M104 from 10.5 to 9.6Good for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 143
Big End: 51.6
Pin: 22
Wide: 22
150g lighter then OEM rods! (each rod)
-
- On sale!
144mm for 3.0/3.2/3.6L M103/M104
€732.00Set of 6
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaftCompression ratios:
3.0 M103 from 9.2 to 8.5
3.0 M104 from 10 to 9.2
3.2 M104 from 10 to 9.1
3.6 M104 stock lengthGood for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 144
Big End: 51.6
Pin: 22
Width: 22
150g lighter then OEM rods! (each rod)
-
147mm for 2.8L M104.942
€732.00Set of 6
Note that some m104 older pistons has longer lower skirt and needs to be ground a bit so that the pistons do not rub the crankshaftLow comp H-beam Rods M104.942 (2.8L) Compression ratio: from 10 to 8.4
Good for 1800hp, Bolts are included in all connecting rods!
Torque of oiled con-rod bolts: 3/8 "(9.53 mm) = 62 Nm
C / C: 147
Big End: 51.6
Pin: 22
Wide: 22
150g lighter then OEM rods! (each rod)
-
- On sale!
722.6 Gearbox Controller
€837.00 €1,037.00722.6 Gearbox Controller Complete with a bolton harness, boost sensor and display
-
XL Sticker
€15.86 -
XL Sticker 2
€15.86 -
Cap
€25.42 -
Hoodie
€55.92 -
Tanktop
€30.50 -
T-shirt
€45.75
